Products

News

See all News listings by clicking this link
more...

Hitachi’s new Petrol Powered drill is perfect for those working in remote locations away from power. For heavy duty work like fitting farm gates, a battery powered cordless drill has been the tool of choice – but still with the problem of batteries running flat. With Hitachi’s DW25EF .88KW Engine and long range fuel tank, drilling applications are tackled with ease rain or shine, in mud and snow.
more...

The revolutionary EDT cordless drill from Hitachi has 8 preset speeds, via a 2-speed gearbox and 4-stage electronic switching. This enables the correct speed to be selected for each and every job, before the trigger is pressed. Supplied without batteries and charger. Please see our 'What's New' page for more information.
more...

       
DH22PG - 22mm, SDS+, 2-mode,
620W
 

Entry level Rotary Hammer
2-mode operation - Drill only and Hammer
Drill
Uses the international standard SDS+ drill bit
system
Chuck and adaptor also available so
standard drill bits can be used - for timber
or steel 
Safety release clutch automatically protects
the motor components should a jam occur
Variable speed and reverse
Supplied with side handle and carry case

Link to DH22PG POS Display Card
  
DH24PC3 - 24mm, SDS+, 3-mode,
800W
 

Premium Rotary Hammer with 3-mode
operation - Drill only, Hammer Drill and
Hammer only (for light breaker work)
Uses the international standard SDS+ drill bit
system
Chuck and adaptor also available so
standard drill bits can be used - for timber
or steel
Safety release clutch automatically protects
the motor components should a jam occur
Variable speed and reverse
Supplied with side handle and carry case

Link to DH24PC3 POS Display Card
 
  
       
       
DH30PC2 - 30mm, SDS+, 3-mode,
850W
 

A great, all-round performer from Hitachi
Uses the international standard SDS+ drill bit
system
Safety release clutch automatically protects
the motor components should a jam occur
3-mode operation - Drill only, Hammer Drill
and Hammer only (for light breaker work)
In Hammer only mode, the chisel or cutter can
be locked at the prefered angle prior to opera-
tion

Link to DH30PC2 POS Display Card
  
DH38MS - 38mm, SDS MAX, 2-mode,
950W
 

SDS MAX shank and variable lock mechanism
for 12-angle chisel positions
2-mode operation: Hammer drilling and
Hammer only
Fastest drilling and demolishing speed in its
class
Idle hammering prevention system for durabil-
ity
Functional and strong design
Supplied in carry case

Link to DH38MS POS Display Card 
  
       

       
DH40MRY - 40mm, SDS MAX, 
950W
 

With the all-new UVP technology, DH40MRY breaks the mould in Rotary Hammer design with improved drilling power, 25% less recoil, and less vibration for the operater.  Utilising the universal SDS MAX bit system, the DH40MRY is the ultimate solution where a fast, ultra-tough unit is required.  The needle pin slip clutch provides higher slip torque accuracy, while allowing for greater operator safety should a jam occur.  A mode selector allows for both Hammer Drilling and Hammer only, while a neutral position enables a chisel or cutter to be rotated to one of 12 positions prior to operation.
Coupled with the large, easy-to-use trigger, variable speed and constant speed control, and the comfortable soft-grip handles, the DH40MRY is a force to be reckoned with. 

Link to DH40MRY POS Display Card
 
      
       
       
DH50MRY - 50mm, SDS MAX,
1400W
 

The latest addition to the Hitachi Rotary Hammer line-up sees a huge core bit capacity of 160mm, combined with a variable speed control of 1050-2150 impact rate, and electronic constant speed control.  Designed for tradespeople that require a competent drill/breaker combination for heavy duty use, this unit has a massive 20 joule energy output, boasts the fastest drilling speed in its class, but weighs just 10.8kg.
Featuring Hitachi's break-through UVP anti-vibration technology to protect the operator from harm, 2-mode operation - Hammer Drilling & Hammer only (chipping), universal SDS Max bit retention system and 12-position adjustment of chisel angle for accuracy of work.

Link to DH50MRY POS Display Card